Back to Applications
EV OBC / DC-DC
AEC-Q200-qualified magnetic components for on-board chargers and DC-DC converters on 400V/800V platforms: FeNi powder cores that keep inductance stable across wide current and temperature swings.
Engineering Challenge
Wide operating temperature range and thermal cycling
High ripple current with low core loss at 20–100 kHz
Automotive reliability requirements (AEC-Q200)
Size and weight constraints in vehicle integration
Key Requirements
Qualification
AEC-Q200
Operating temperature
−40°C to +180°C
Switching frequency
20 – 100 kHz
Saturation flux density
≥ 1.5 T
YUTE Solution
YUTE supplies FeNi powder-core inductors and custom magnetic components with AEC-Q200 qualification, covering OBC and DC-DC designs where DC bias stability and wide temperature behavior matter most.
Recommended Technologies
FeNi powder coreMnZn / NiZn ferriteToroidal and molded constructionAutomotive-grade testing
Recommended Products
Technical Data
| Product | Series Part | Inductance (µH) | Isat (A) | DCR (mΩ) | Size (mm) |
|---|---|---|---|---|---|
| High Flux Cores | YTFN-6028 | 0.10 – 10.0 | 18 – 65 | 0.45 – 8.5 | 7.0 × 6.6 × 2.8 |
| High Flux Cores | YTFN-8040 | 0.22 – 22.0 | 25 – 85 | 0.28 – 6.2 | 8.0 × 8.0 × 4.0 |
| High Flux Cores | YTFN-1045 | 0.33 – 47.0 | 30 – 110 | 0.18 – 4.5 | 10.0 × 10.0 × 4.5 |
| High Flux Cores | YTFN-1265 | 0.47 – 100 | 40 – 150 | 0.12 – 3.2 | 12.5 × 12.5 × 6.5 |
| High Flux Cores | YTFN-1510 | 0.68 – 150 | 50 – 180 | 0.10 – 2.2 | 15.0 × 15.0 × 10.0 |
| Custom Magnetic Components | YTCS-TLVR | 0.10 – 2.2 | 20 – 80 | 0.30 – 5.0 | Custom |
| Custom Magnetic Components | YTCS-MTFW | 1.0 – 100 | 5 – 40 | 1.0 – 20.0 | Custom |
| Custom Magnetic Components | YTCS-PFC | 10 – 500 | 10 – 60 | 0.50 – 15.0 | Custom |
| Custom Magnetic Components | YTCS-DCDC | 0.47 – 47 | 15 – 100 | 0.15 – 8.0 | Custom |
Engineering Resources
Selecting for your application?
Engineering responds within 24 hours with a free technical evaluation and sample support.
Request A Quote